According to statistics, the popular indoor interior flooring in the market mainly consists of solid wood flooring, solid wood composite flooring, laminate flooring and bamboo flooring. Suspended paving is often used for parquet and laminate flooring. More than 40% of the floor complaints were caused by improper paving. Gao Zhihua, executive deputy director of the China Timber Distribution Association Floor Committee, said that the quality of the floor is not limited to the floor itself. The paving of the floor has become an important part of the quality of the floor products.
The solid wood floor is mostly made of keel paving.
The suspension pavement method should be kept at a distance from the ground. The specific installation method of the suspension pavement method is divided into four steps: first, on-site inspection; second, cushion laying; third, floor trial shop; four. On-site inspection is mainly to check the door cover and the distance of the door leaf from the ground. If the device is less than 5 mm, the door leaf needs to be removed and there is a gap of 5 mm. Use a planer to plan the bottom of the door to ensure that the door and the ground leave a gap of 5 mm to prevent friction between the door and the floor. The mat should be laid perpendicular to the direction of the floor strip. Floor trials should be carried out before the formal installation, ie no glued paving. When trying to assist, the direction of the floor strip is usually the same as the length of the room.
According to the order of the test floor strips, the assembly is formal. Then use a tensioner to check if the groove combination is tight. The last row of floors should be measured by appropriate methods for cutting, sizing, and tightening with a hook. During the laying process, if pipes, columns, etc. are encountered, the holes should be cut properly, taking care to leave a certain gap. After the glue is applied, the excess glue squeezed into the gap of the floor should be shoveled in time and cleaned with a damp cloth. After the device is finished, it must be at least 12 hours to walk on the floor so that the floor glue has enough time to bond.
The keel paving keel paving and the surface paving are two key links in the keel paving method. The keel paving method is a commonly used paving method for solid wood flooring. Gao Zhihua introduced.
The wooden keel must be straight and flat, and the keel should be treated with anti-corrosion treatment before paving. When paving. The length of the skid should be 200 mm, and the spacing of the mats should not exceed 400 mm. The main keel spacing is determined by the length of the wooden floor, and the keel spacing must not exceed 400 mm. Generally, the keel is fixed on the ground by electric hammering. The paved keel should be fully flattened and tested for firmness. The wall section of the wooden keel should have a 510 mm expansion joint with the wall. The pavement of the floor covering is generally dislocated. After leaving a gap of 810 mm from one side of the wall, the first wooden board is laid, the corner of the floor is outward, and the floor is fixed on the wooden keel with screw nails. The blocks are tightly nailed. In order to keep the floor level, it is necessary to pull a flat line for every 35 floors to check whether the floor is straight.
The floor ash, residual mortar and other debris that affect the floor pavement must be disposed of clean. The wooden floor should have a 510 mm gap at the wall, and the wooden keel must pass the inspection before the floor surface can be laid. To facilitate ventilation, to prevent the floor from getting wet and arching.
There is a "law" for floor covering inspection. According to individual flooring companies, "remarketing, light paving" does not recognize the importance of paving, currently. As a result, the business level and management level of the paving workers did not keep up with the development of the sales situation. The person in charge of a wooden floor manufacturer said frankly that this did not understand the characteristics of the floor, did not understand the way of floor management, re-marketing, and light paving.
The solid wood floor is mostly made of keel paving.
The suspension pavement method should be kept at a distance from the ground. The specific installation method of the suspension pavement method is divided into four steps: first, on-site inspection; second, cushion laying; third, floor trial shop; four. On-site inspection is mainly to check the door cover and the distance of the door leaf from the ground. If the device is less than 5 mm, the door leaf needs to be removed and there is a gap of 5 mm. Use a planer to plan the bottom of the door to ensure that the door and the ground leave a gap of 5 mm to prevent friction between the door and the floor. The mat should be laid perpendicular to the direction of the floor strip. Floor trials should be carried out before the formal installation, ie no glued paving. When trying to assist, the direction of the floor strip is usually the same as the length of the room.
According to the order of the test floor strips, the assembly is formal. Then use a tensioner to check if the groove combination is tight. The last row of floors should be measured by appropriate methods for cutting, sizing, and tightening with a hook. During the laying process, if pipes, columns, etc. are encountered, the holes should be cut properly, taking care to leave a certain gap. After the glue is applied, the excess glue squeezed into the gap of the floor should be shoveled in time and cleaned with a damp cloth. After the device is finished, it must be at least 12 hours to walk on the floor so that the floor glue has enough time to bond.
The keel paving keel paving and the surface paving are two key links in the keel paving method. The keel paving method is a commonly used paving method for solid wood flooring. Gao Zhihua introduced.
The wooden keel must be straight and flat, and the keel should be treated with anti-corrosion treatment before paving. When paving. The length of the skid should be 200 mm, and the spacing of the mats should not exceed 400 mm. The main keel spacing is determined by the length of the wooden floor, and the keel spacing must not exceed 400 mm. Generally, the keel is fixed on the ground by electric hammering. The paved keel should be fully flattened and tested for firmness. The wall section of the wooden keel should have a 510 mm expansion joint with the wall. The pavement of the floor covering is generally dislocated. After leaving a gap of 810 mm from one side of the wall, the first wooden board is laid, the corner of the floor is outward, and the floor is fixed on the wooden keel with screw nails. The blocks are tightly nailed. In order to keep the floor level, it is necessary to pull a flat line for every 35 floors to check whether the floor is straight.
The floor ash, residual mortar and other debris that affect the floor pavement must be disposed of clean. The wooden floor should have a 510 mm gap at the wall, and the wooden keel must pass the inspection before the floor surface can be laid. To facilitate ventilation, to prevent the floor from getting wet and arching.
There is a "law" for floor covering inspection. According to individual flooring companies, "remarketing, light paving" does not recognize the importance of paving, currently. As a result, the business level and management level of the paving workers did not keep up with the development of the sales situation. The person in charge of a wooden floor manufacturer said frankly that this did not understand the characteristics of the floor, did not understand the way of floor management, re-marketing, and light paving.
Silicone Tableware Set,Silicone Childrens Plates,Silicone Dishware,Silicone Tableware
MeMe Baby Product (GZ) LLC , https://www.gzkupbo.com