Human chemerin enzyme-linked immunoassay (ELISA)
Kit instruction manual
This reagent is for research purpose only: this kit is used to determine the content of chemerin in human serum, plasma and related liquid samples. Shanghai Yanjin biological high-quality ELISA kit supplier, excellent quality, perfect after-sales. Welcome to inquire: 021-35301269 mobile phone provides free generation testing service.
Experimental principle:
This kit uses the double antibody sandwich method to determine the level of human chemerin in the specimen. The microplate is coated with purified human chemerin antibody to make a solid-phase antibody. Chemerin is added to the monoclonal antibody-coated microwells in turn, and then combined with the HRP-labeled chemerin antibody to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, add substrate TMB to develop color. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with the chemerin in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of human chemerin in the sample was calculated by a standard curve.
Kit composition:
Kit composition
48 hole configuration
96-well configuration
save
Instructions
1 serving
1 serving
Sealing film
2 pieces (48)
2 pieces (96)
sealed bag
1
1
Enzyme coated plate
1 × 48
1 × 96
Store at 2-8 ℃
Standard product: 54ng / L
0.5ml × 1 bottle
0.5ml × 1 bottle
Store at 2-8 ℃
Standard dilution
1.5ml × 1 bottle
1.5ml × 1 bottle
Store at 2-8 ℃
Enzyme reagent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Sample diluent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer A liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer B liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Stop solution
3ml × 1 bottle
6ml × 1 bottle
Store at 2-8 ℃
Concentrated washing liquid
(20ml × 20 times) × 1 bottle
(20ml × 30 times) × 1 bottle
Store at 2-8 ℃
Sample processing and requirements:
1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage.
2. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen, mixed for 10-20 minutes, and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
3. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation.
4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use.
6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP).
Steps
1. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of standard products in the first and second wells, and then add standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentrations are 36ng / L, 24ng / L, 12ng / L, 6ng / L, 3ng / L).
2. Add samples: set up blank wells (the blank control wells do not add samples and enzyme reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the test sample (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.
4. Mixing solution: Dilute 30 times (20 times of 48T) concentrated washing liquid with distilled water 30 times (20 times of 48T) and then use.
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat this 5 times, pat dry.
6. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.
7. Incubation: The operation is the same as 3.
8. Washing: The operation is the same as 5.
9. Color development: add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).
11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
Precautions:
1. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.
2. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).
5. The sealing film is limited to one-time use to avoid cross-contamination.
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
Calculation:
Taking the concentration of the standard as the abscissa and the OD value as the ordinate,
Draw a standard curve on coordinate paper, according to the OD of the sample
The value is determined by the standard curve; then multiplied by the dilution
Multiple; or calculate the standard using the concentration and OD value of the standard
The linear regression equation of the quasi-curve, the OD value of the sample
Substitute into the equation, calculate the sample concentration, and multiply by the dilution
The multiple is the actual concentration of the sample.
(This picture is for reference only)
Kit performance:
1. The correlation coefficient R between the linear regression of the sample and the expected concentration is above 0.95.
2. The batch and approval shall be less than 9% and 11% respectively
examination range:
2ng / L -40ng / L
Storage conditions and validity period:
1. Store the kit: 2-8 ℃.
2. Validity: 6 months
Shanghai Yanjin Biological Technology Co., Ltd. specializes in selling ELISA kits of various brands and price levels. Serving universities and immunology research units. Quality assurance and perfect after-sales service. And can be free to detect, better service for you.
Lip color classification
Elegant work lip color
9:00--17:00 Elegant work lip color
The water-bright luster looks vigorous. I worked overtime last night or didn't sleep well. If you want to look more energetic when you go to work today, you might as well choose a bright and shiny Lip Gloss and apply it evenly on your lips.
I want to have an unobtrusive go-to-work makeup effect. You can choose a very popular nude makeup lip color, put Liquid Foundation on the lips, and then spread some loose powder to make the lips look soft and delicate, and then apply a matte flesh pink Lipstick , the coloring does not need to be too strong.
A light berry red moisturizing lips gives a nice look. Are there any important customer appointments today? May wish to use elegant raspberry red or peach lipstick to make your complexion more outstanding.
Charming dating lip color
18:00--20:00 Charming dating lip color
Orange-red lips with a mature flavor. Just apply the matte lipstick evenly, no need to use lip gloss. If the lip shape is not good, you can use a Lip Brush to dip the lipstick to outline a more rounded lip line.
Trendy feminine pink lips. Matte pink lips are popular, making your lips look softer and more seductive. But the premise is that the lips must be very moisturized.
Light pink and pearly lips that make you look younger. Pink pearl lipstick is more suitable for people with full lips. If the lip shape is not good, try a bright pink lip gloss. Apply more on the middle part of the lips to create a delicate effect.
Outstanding fashion lip color
20:00--24:00 Outstanding fashion lip color
Retro dark red lips. This season's Hollywood-style big red lips are a thing of the past, and the deep red and alluring red lips are the focus. First apply the dark red lipstick on the center of the lips, and apply the lighter #1 lipstick on the periphery, the effect is like petals.
Super dazzling color like a road sign. Who would have thought that such an eye-catching color would be put on the mouth? This is precisely the color trend of the spring and summer of 2008. Apply some foundation before applying lip color to make the color more saturated, and apply thicker. Xuan Huang, Xuan Lan, Xuan Zi are all worth a try.
Think of lips as "painting". Paint your lips like a picture. This creative method of lip color application can instantly make you the focus of the PARTY.
TIPS:
If you want to respond to different occasions by changing lip color throughout the day, you need a versatile makeup look. It should be a uniform and long-lasting base makeup + brown Eye Shadow that modifies the eye contour + black eyeliner + black Mascara + natural light Black eyebrows + orange-brown Blush .
Matte Liquid Lipstick,Long-Lasting Lip Mud,Velvet-Mist Lipclay,Liquid Lip Gloss
Jilin Xiangqi Technology Co., Ltd , https://www.xqccosmetics.com