When water seeps into the floor, it is necessary to notify the floor installer at the first time and avoid dismantling it. The following methods can reduce losses:
1. Strengthening the floor No matter the size of the water area, it is not recommended to pick up and dry, so the floor will not be used again. The correct way is to quickly drain the surface water of the floor, remove the baseboard, expose the expansion joints, and distribute the water vapor by the expansion joints.
2, solid wood floor small area into the water, you can use a high-power vacuum cleaner to suck out the water vapor, but a large area of ​​water needs to lift the floor all dry.
3. After the water-repellent floor is picked up, the surface water of the floor should be dried, and then placed in a “well†shape and placed on the reverse side to prevent the surface from being dry and cracked due to rapid drying. Good solid wood or multi-layer solid wood flooring can be used again.
Bar Chair,Kitchen Bar Stools,Swivel Bar Stools,Black Bar Stools
CAMOSA HOME , https://www.camosa-funiture.com