1) Selection of light source
The photo sensitive range of the positive version of the PS version is in the blue region and near ultraviolet region (320-450nm), the most sensitive region is 375nm, and the metal halogen light source is the most suitable for exposure.
2) Check the vacuum degree of the printing machine.
Check the vacuuming performance of the plate-making machine before exposure to the plate. During the operation, the glass of the plate-making machine should be cleaned, and the publication should be taken under a yellow light or dim light. Avoid contamination, bending and scratching when taking the plate Place the plate on the plate-making frame, stack a 60-cm / cm gray contact screen on the top, start the vacuum system, and check the uniformity of the air in the entire layout.
3) Determine the height of the printing light source
When printing, the light intensity at the edge of the plate should be controlled to be equal to about 90% of the light intensity at the center of the plate. The selection of the height of the light source should be at least equal to the diagonal length of the plate so that the plate can receive light evenly.
4) Test method of plate exposure
Direct method uses a UV illuminance meter to directly detect the exposure of the plate.
Indirect method First use the signal bar to test the resolution of the plate, and then calculate the exposure.
2. Development
There are two types of manual development and mechanical development. Using standardized development methods will reduce many of the disadvantages that affect performance during development. It is recommended to use Huaguang brand developer, dilution ratio: 1: 6-1: 8, development temperature: 23 ℃ plus or minus 2 ℃, development time: 30s-60s.
3. Revision
Common revision liquids such as Fuji P-L type, Huaguang PW type, Lide LD type, etc. In order to eliminate the excess image and spots on the plate after developing and washing, you can apply a small amount of plate-fixing agent to the removed area, leave it for about 20-60 seconds, wipe it off with a damp cloth, and then wash it with water.
4. Baking version
Baking plate can improve the combination of coating chemicals and aluminum base to improve the durability of printing. Pour the baking solution onto the plate washed with developing water, scrape it evenly with a rubber scraper, and wipe it evenly with sponge. Then bake in the baking machine for 5-7 minutes, and the temperature is controlled at 220-230 ℃. After cooling naturally, put in the developer for 1 minute, and then wash with water.
5. Apply protective glue
The purpose of applying protective glue is to improve the water absorption performance of the non-affected zone. After developing and washing, use protective sponge to dip the protective glue, wipe it evenly and thinly on the plate surface, then blow dry or dry it and keep it in dark place for printing.
ABLE Fire Pit Logs, made of light ceramic raw materials or cement materials, light weight but strong not easy to break, hand-painted, natural colors and amazing details & realistic shapes, easy turn redness in the fire, can enhance the fireplace flame, all made of inorganic materials, odorless, fire-resistant temperature >900℃, product can be used for a long time, with reasonable price.
ABLE also have advanced molding technology for ceramic log called cast log, it is lighter, stronger, fuller details, and glowing area is larger in the fire.ABLE can supply many kind of log accessories for fireplace, such as pebbles, coals, charcoals, pine cones, maple leaves, aglow ember, top-grade rock wool, stained vermiculite, small coal chips, barks, balls and hollow ball, ceramic pitted pebble and rough Lava rock that won't burst in outdoor fire pit, Pumpkin lamp, Skull and bone for Halloween Decor fire, fireplace log grate etc.
ABLE factory is located in Yixing City, Jiangsu. It is a well-known production base for fire resistant insulation materials and environmental protection products. Yixing is also a city has developed commerce and convenient transportation. Our company sincerely hopes to cooperate with professional customers, and welcome to visit our factory!
Fire Pit Logs,Ceramic Logs For Fire Pit,Fire Pit Wood Logs,Smokeless Logs For Fire Pit
Yixing Able Ceramic Fibre Products Co., Ltd , https://www.ablegaslogs.com