Bogo Ma launches the latest CX Fillstar filling machine

In the filling technology developed by Procomac, the latest CX Fillstar filling machine plays an important role in the beverage industry. For a filling line, its safety, operability and versatility are very important. In addition, bottle filling technology is also very important.

At present, high speed and safety have become the most basic requirements for all filling production lines. On the other hand, through the study of consumers' purchasing psychology, the packaging containers for inflatable soft drinks and pure juices are continuously improved. Therefore, packaging containers and products need to be constantly replaced on the filling production line. This kind of problem is even more sensitive to composite packers, and they also need to make frequent adjustments.

The latest technological developments in aseptic filling lines have prompted many beverage manufacturers, especially those sensitive to them, to install such filling devices like isotonic, non-inflatable fruit juice drinks, tea, and pure juices. Therefore, it is necessary to have a filling line that can fill various beverages with bottles throughout the year. Only in this way can the company's investment be recovered quickly.

For these problems, the best solution is to use the CXFillstar new container back pressure electronic filling machine - this is a latest technological innovation project developed by Bogmar under the principle of electromagnetic flow meter. It is a universal filling system capable of handling bottles and products of various specifications, with the highest product packaging quality and operational safety.

An annular tank is installed on the filling carousel, and the filling valve can handle various clear liquid products or liquid products with slurry and food fiber. Pneumatic control valve can be used to complete a number of filling operations.

All operating parameters can be stored and extracted on the operating screen in front of the unit.

The CX Fillstar type filling tray is equipped with an external model bottle device at each filling valve for flexible insertion and removal of the model bottle. If this accessory is installed on the side of the filling tray, a separate model bottle can be used. The device can be CIP-cleaned with 121°C hot water. It is recommended to use the same diameter of the bottleneck. When changing the bottle size, it is not necessary to stop operation.

For CX Fillstar type filling discs, existing DN50 to DN140 filling valves. When filling non-inflatable beverages, its production capacity is 18,000 to 67,500 bottles <1 liter)/hour; when filling soft drinks, its production capacity is 18,000 to 55,000 bottles (1 liter) /Time.

There are three different types of filling: an aseptically-filled beverage in which the bottle and the nozzle are in contact, and a sterile, non-inflatable beverage in which the bottle is not in contact with the nozzle. These two types of filling enable the close integration of microbial separation and beverage filling.

Non-inflatable beverages and carbonated beverages in contact with the bottle and nozzle. This type of filling, including oxygen-sensitive products, requires the bottle to be rinsed during the filling process.

Specially designed "long tube type" for PET bottle filling beer. In the filling process, it is controlled by three pneumatic valves - container pressure, filling and decompression. This type of filling requires flushing the CO2 twice in the container and filling it from the bottom of the container, which greatly reduces dissolved oxygen.

According to the requirements of packaging containers and products, this filling machine is an extremely flexible filling system, which at the same time ensures that the device has higher operating performance and hygienic conditions.