The order of adding ink should be from large to small, that is, the main color ink with a large proportion is added first. The preparation of light-colored ink should first put the diluent, and then gradually add dark ink to the dilute. There are two methods for blending inks: a small amount of ink can be mixed manually; a large amount of ink should be mixed mechanically.
The hiding power of ink refers to the ability of ink to hide the background color. The stronger the hiding power, the lower the transparency of the ink. Four-color printing requires high transparency of the ink, otherwise it will affect the color reproduction effect of the printed matter.
Adjust the adhesion of ink according to the following factors during printing:
â‘ The surface strength of the paper. The surface strength of the paper is large, and the adhesion of the ink can be adjusted larger: otherwise, the adhesion should be adjusted smaller, otherwise the paper will "fall off". The 'hair loss' is very powerful and seriously affects product quality and production efficiency, which is often the main motivation for adjusting ink adhesion.
â‘¡ Printing speed. When the speed is fast, the requirements for adhesive deployment are smaller, and vice versa. The faster the speed, the more likely to be 'brushing' and uneven ink transfer, and it is necessary to reduce the adhesion to adapt to it.
③ Layout graphic structure. When printing screen mesh images, the most important thing is that the shape and area of ​​the dots should be copied correctly, and the adhesion should be adjusted larger. When printing a solid image, I hope to get a uniform and thick solid field, and because there is no problem of dot enlargement, the adhesion should be smaller.
â‘£Workshop temperature. As the temperature rises, the cohesion of the ink will decrease, and it will be more prone to emulsification and increase in dot increase rate. When adjusting the ink, the adhesion of the ink must be adjusted in advance. On the contrary, the adhesiveness of the ink is reduced.
In the production of packaging offset printing, the ink dries too slowly, and the most common drawback is that it is prone to 'dirt rubbing'. In addition, if the ink drying speed is too slow, the free penetration of the binder will increase, which will cause the ink color to be dull and lack of gloss. The ink dries too quickly, the ink surface layer is easy to film during the printing process, which affects the production process, and may also cause the ink to crystallize, which affects the subsequent ink color printing for dry overprinting.
Introducing our Microfiber Car Glove - the perfect tool for keeping your car looking clean and polished! Made with high-quality microfiber material, this glove is gentle on your car's surface while effectively removing dirt, dust, and grime. Its unique design allows for easy maneuvering around tight spaces and corners, making it a versatile cleaning tool for any car owner. Plus, its durable construction means it can be used again and again, making it a cost-effective choice for keeping your car looking its best. Say goodbye to messy car interiors and hello to a shiny, spotless ride with our Microfiber Car Glove!
microfiber car cleaning mitt,best micorifber washing glove,microfiber gloves for car,car wash microfiber mitt manufacturer
jiangsu qiyun cleaning knitting product co.,ltd , https://www.maleclean.com