Microwave rapid moisture tester content:
Microwave moisture measuring instrument (humidity measuring instrument) represents the new development of product moisture measurement technology. Using microwave measurement technology, the absolute moisture can be determined within 1 second. The accuracy of the measurement result is high, which is not affected by the particles, color and The effect of any minerals.
It is made using the principle that microwave energy is attenuated when microwaves are absorbed through matter. It can be used to measure the moisture of coal powder, petroleum, or various crops; check the humidity of grain depots; measure the moisture content of soil, fabrics, etc. For the production line conveyor control type, continuous non-contact online microwave measuring instruments can be installed, as shown in the figure. At this time, a pair of microwave antennas are installed on the measurement bracket on the production line. The transmitting antenna is installed under the belt, and the receiving antenna is installed above the belt. The density compensation measurement channel is installed before the microwave measurement channel
Pass through the material to be tested vertically.
Technical index
1. Measuring range: 0 ～ 85% moisture content (within 10% measuring range).
2. Measurement time: less than 1 second.
3. Measurement accuracy: 0.5%.
4. Power supply: 220V, power consumption: 20 W.
5. Display mode: 4 digits.
6. Microwave frequency: 9.6 GHz.
Technical level: Compared with the traditional method of measuring moisture by drying weightlessness, microwave measurement of moisture has the advantages of rapid, accurate, non-contact and non-destructive sample. The instrument has density and temperature compensation measurement devices, which can correct the inaccurate measurement results caused by changes in layer thickness and material density. For example, when the load of the belt changes, and the density of the material in the conveyor belt changes, it is necessary to perform corresponding compensation measurements. The entire instrument is controlled by a microcomputer, which has the characteristics of automation and intelligence.
Industrialization prospects: This product has been filed with the Heilongjiang Provincial Technical Supervision Bureau and established local technical standards. Can be directly produced and sold.
Application areas: chemical industry, building materials, wood, paper, food, etc. The instrument can also be used in the laboratory as a measure of moisture content
Air Filter,Air Purifier,Hepa Filter,Air Cleaner
Ningbo Ifilter Purification Equipment CO.,Ltd. , https://www.aifilterparts.com