Everyone knows that the maintenance of engraving machinery equipment is extremely important, and it also directly affects the service life of this equipment. However, in addition to the maintenance of the engraving machine, the maintenance of the engraving machine is also important to consider the season of use. Carved carving made the following suggestions based on winter maintenance:
The first is the temperature. Although the temperature does not have a great impact on the engraving machine, because many customers will add butter to the screw, they will definitely forget to clean it in winter, resulting in no movement every time they are turned on. Like the winter in the north is very cold, the temperature of the studio will be very low, although the machine will not move even if the oil is added. At this time, we must ensure that the temperature in the workshop reaches the minimum temperature of the refueling standard.
The second is cooling water. Since the cooling water needs to be replaced every day in summer to avoid exceeding the prescribed temperature, many customers will ignore this in the cold winter and think that the temperature of cold water will not increase much. Therefore, many customers often forget to change the water, especially in winter, because the outside temperature is very low, it is difficult to feel the spindle motor heat. Therefore, we particularly remind customers that cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is too dirty, it will cause serious damage to the motor and ensure the cleanliness of the cooling water and the normal operation of the pump.
Finally, there is the problem of the cleaning of the engraving machine. Many users who have used the engraving machine think that the engraving machine does not need to be cleaned, and sometimes it can be cleaned properly. Because they think that the engraving machine itself will produce a lot of dust during use, and it will be very troublesome to clean it every day. This will easily damage the engraving machine and reduce the service life. The correct approach should be to clean the countertop in time after work , Which provides convenience for the next work. Clean the guide rails and material scraps next to the guide rails to prevent jamming during machine operation due to debris interference. Clean the screw regularly to prevent foreign objects from sticking to the screw. The screw is very important in the equipment. He determines the accuracy of the machine, and the screw also plays an important role in the transmission process.
10 Colors Pen,10 colors multicolor pen,10 colors multicolor ballpoint pen,multicolor pen with 10 colors refill
Tonglu shangmei pen industry co.,ltd , https://www.shangmeipenindustry.com