Pulp molded products are typical green packaging materials

Pulp molded products are filled with "green" from raw materials, production processes, and final disposal of waste. The raw material for the production of pulp molded products is paper fiber, and most of the products are used waste paper. The use of waste not only reduces resource consumption, reduces environmental pollution, but also greatly reduces costs. The raw material for producing pulp molded products is “green”. .

The process for producing pulp molded products is to pulp waste paper pulp into pulp, and then vacuum-adsorption the mold in a special shape (similar to the shape of the package), and then transfer, demoulding, and baking. Dry and other processes, and some also need to carry out an appropriate type, namely a special packaging liner.

In the entire production process, most of them are physical processes. Even if there is a need to add a little reinforcing agent and water repellent agent, there will be no impact on the health of workers and the environment. There are two ways to use water in the production process, one part is evaporated by drying and the other part can be recycled. Therefore, its production process is also "green".

After the pulp molded products are packaged, the waste disposal method also has its flexibility. Generally, there are three ways to go. One is to recycle and reuse paper or to continue to make molded pulp products. The second is natural degradation, which acts as a fertilizer and increases soil organic matter. Thirdly, it can be burned without need of emergency treatment. No toxic gas is produced. So the waste of pulp molded products is also "green."