Indentation equipment connected with saddle stitching
Covercrease USA has introduced an indentation device suitable for on-line linkage with Harris, Macey, Heidelberg, Sheridan and Mailer Martini. The excellent characteristics of the device can prevent the fiber from being crushed when the spine is indented.
The equipment is composed of a female / male indentation wheel, the female indentation wheel is fixed on the driving shaft, and the male indentation wheel is fixed on the passive indentation wheel. This equipment can complete the online indentation and punching process of thick ink layer printing, ultraviolet glazing printing and heavy cover, etc. The female / male indentation wheel can be replaced in just a few minutes.
double-sided tape
Glue Dots' double-sided adhesive tape product is a double-sided pressure-sensitive adhesive dot-adhesive product on a release liner. The tape can be instantaneously fastened. It is very suitable for quickly pasting promotional advertisements, samples or other information, and guarantees the single-page product. The paste is clean and smooth.
Pre-extrusion coated pressure sensitive adhesive
The production of Tacky Spots pre-extruded pressure sensitive adhesive developed by Chicago Glue Machine has exceeded 6,000 standard rolls. The company can also produce single-sheet pre-extruded coated pressure-sensitive adhesives according to customer requirements, and has a variety of products with low viscosity, medium viscosity, high viscosity and ultra-high viscosity. Materials and digital printing and offset printing sheets, and even processing sheets from other printing methods, can bind monochrome printing sheets and color printing sheets together.
DemandWorks' booklet processing system can also be equipped with an independent paper feeder to process booklets with customized covers. In a batch of printing jobs, each booklet can be bound into booklets with different content and different page numbers to achieve on-demand binding. The book binding integrity of the entire batch of books is guaranteed by the pre-reading system, which uses one-dimensional and two-dimensional barcode reading or OCR reading technology to control the sorting of different content page numbers and different covers.
Upgraded desktop binding machine
Powis Parker's upgraded desktop binding machine Fastback 15xs can bind books up to 11 inches thick (3 to 350 pages), and can be equipped with covers of various materials, such as fabric, film, glossy paper, etc. After using barcode technology, the binding machine can also read book binding barcodes, calculate the best processing time according to the type of book being bound, and make the binding speed up to 4 books per minute.
Integrated hardcover book production line / three-sided book cutter
Mailer Martini's AmigoDigital hardcover book production line and three-sided book cutter constitute a complete automatic book production line. The production line had continuous production demonstrations at the on-demand printing exhibition and drupa exhibition, which fully demonstrated the charm of on-demand printing and post-press processing.
The three-sided book cutter can also be connected to a short- or medium batch processing scale hardcover production line. The highlight is the programmable logic control touch screen console used in automatic preparation. The cutting speed of the three-sided book cutter is 2000 times per hour, and under the maximum cutting thickness of 3 inches, multiple books can be cut at a time.
On-demand printing digital hardcover system
Spiel Associates has introduced the Sterling Digibinder digital hardcover book binding system, which is a one-click hardcover book processing system designed for on-demand printing. The Digi-binder hardcover system can process hardcover books up to 11 inches thick, with a processing speed of 360 books per hour. When converting jobs, you only need to enter the size required for book binding on the keyboard, and the pneumatic book holder can automatically adjust to fit the thickness of the book being bound. In addition, the system uses the book spine as a whole instead of slotted. The double glue wheel device can ensure even glue, and is equipped with glue pressing device.
Quick setting automatic screw binding machine
Plastikoil developed the PBS 3000QS quick setting automatic screw binding machine. The small binding system has the basic setting function. No tools are needed for renewal. The spiral pitch is easy to adjust and the cost is low. The booklet is placed vertically.
Single-arm punch
MBM's 55-type single-arm desktop paper puncher has a 5-hole preset mode, with a 2 inch thick paper punching capability, a minimum aperture of 7/64 inches, and a fast clamping device to ensure that the paper is well fixed when punching .
Online punch
The Fusion Punch II puncher launched by Xerox Corporation and connected to GBC is designed to punch holes for the spiral binding of documents that require flattening. The Fusion Punch II puncher includes an online book stacker and an adjustable puncher capable of processing mixed paper. It has become the standard configuration of Xerox's DocuColor, DocuTech, and DocuColor iGen 3 series digital presses.
Single-sided laminating machine
D & K Group introduced System 2760 single-sided laminating machine. It is equipped with a compact automatic paper feeder that is easy to operate, a swing mandrel that is easy to load film, an automatic sheet separation device and a PLC touch screen control panel. It can also be equipped with a surface molding roller that is easy to replace quickly.
High-speed laminating machine / production punching machine
Polaris of GBC is a single-sided high-speed laminating comprehensive processing system. The highly automated Polaris laminating machine is equipped with an 18-inch high-stack paper feeder suitable for high-volume processing, which can carry out high-speed laminating processing on papers of various specifications and quantitative amounts.
Quantum P70iX production high-speed punching machine from GBC also has the characteristics of fast processing speed, mold replacement and CNC panel without tools, and can support almost all existing punching modes.
Rotary indentation device
The Tech-Ni-Fold Tri-Creaser indentation device introduced by Converting Resource Network can be connected to the folding machine, so as to avoid fiber breakage during folding processing of substrates with a basis weight of 100 lbs or higher. In particular, digitally printed sheets are prone to this phenomenon). Its unique rotary indentation processing device replaces the original offline indentation processing. The specially designed indentation bead and a variety of selectable indentation widths allow untrained operators to easily perform perfect indentation processing. Don't care too much about the direction of paper fibers.
Tri-Creaser can also be used with folding / indentation equipment from major companies such as Stahl, MBO, Herzog & Heymann, Shoei, Horizon AFC, GUK, and Rollem.
Slitting / indentation / cutting combined system
Duplo's DC-545HC slitting / indentation / cutting combination system is very suitable for on-demand printing and personalized printing, especially for commercial cards, CD inserts, brochures, calendars, fixed-point sales products and similar products. For processing, it can store up to 80 processing programs, and the automatic setting and correction functions make it easy to operate. DC-545HC is equipped with a device capable of reading printed images, which can automatically adjust and compensate for post-press processing problems caused by image shifts. Its 4 slitting heads and enhanced material processing capabilities enable the device to complete slitting at once , Indentation and cutting.
Indentation, punching and slitting system
Rollem's Champion 990 ETR system can perform indentation, punching, and slitting processes digitally to avoid common failures such as tearing of printed sheets or incorrect marking. The system can load sheets up to 30 inches thick at a time, and can be processed online with an eight-fold folder. The processing speed is 18,000 sheets per hour. It can process 4 inches × 6 inches to 24 inches × 29 inches of printed sheets, from 20 pounds Thin paper to heavy board can be processed.
Impact indentation processing system
Graphic Whizard's Creasemaster indentation system is to perform impact indentation processing on the material before folding, so as to avoid the problem of digital printing material color material cracking. The system can process various types of substrates, with a basis weight of 385g / m2, a format of 18 inches x 251 inches, and a speed of 50 sheets per minute. The front and back step adjustment during printing sheet processing is controlled by a microprocessor, and only one printing sheet can easily determine the precise position of the indentation. The system can also store up to 100 preset jobs, and the preset data can be recalled by simply pressing a button.
The Creasemaster indentation system using friction paper feed uses the upper paper feed method, thus avoiding the problem of printed sheet scratches, and the paper can be loaded without stopping during the process. The characteristic of Creasemaster Plus creasing machine is that it is equipped with a horizontal vacuum paper feeding system, which is more suitable for the creasing of high-grade or high-gloss substrates.
Indentation equipment connected with saddle stitching
Covercrease USA has introduced an indentation device suitable for on-line linkage with Harris, Macey, Heidelberg, Sheridan and Mailer Martini. The excellent characteristics of the device can prevent the fiber from being crushed when the spine is indented.
The equipment is composed of a female / male indentation wheel, the female indentation wheel is fixed on the driving shaft, and the male indentation wheel is fixed on the passive indentation wheel. This equipment can complete the online indentation and punching process of thick ink layer printing, ultraviolet glazing printing and heavy cover, etc. The female / male indentation wheel can be replaced in just a few minutes.
double-sided tape
Glue Dots' double-sided adhesive tape product is a double-sided pressure-sensitive adhesive dot-adhesive product on a release liner. The tape can be instantaneously fastened. It is very suitable for quickly pasting promotional advertisements, samples or other information, and guarantees the single-page product. The paste is clean and smooth.
Pre-extrusion coated pressure sensitive adhesive
The production of Tacky Spots pre-extruded pressure sensitive adhesive developed by Chicago Glue Machine has exceeded 6,000 standard rolls. The company can also produce leaflets according to customer requirements
One Leg Standing Desk,Single Leg Standing Desk,Single Leg Height Adjustable Table,Standing Desk One Leg
Ningbo Fengyi Intelligent Furniture Technology Co., Ltd. , https://www.nb-fengyi.com