Due to the increasing use of beer labels, more and more attention has been paid to the cutting of beer labels. The following is a summary of the experience in the marking of wine labels.
1. Due to the large amount of dusting between the trademarks printed by the offset press, there will be some deviations in the die-cutting process; and the surface of the logo printed by the flexo printer will be printed with UV varnish, so that during the process of die-cutting There is no longer a slight displacement in the plane, which results in a 2 to 3 percentage point increase in the passing rate of the flexo mark compared to the offset mark.
2. If the paper is loose or poorly stiff, it should be die cut at every 500 sheets or 1000 sheets. However, it should be noted that large hard particles must be inspected on the surface and inside of the cardboard, because particles larger than 0.3 mm are enough to damage the edges of the die-cutting tool.
3. If the print is curled in the front, the back mold should be used, and when the print is curled in the front, the positive mold should be used.
Source: Xinhua Printing Network
The backing plate/ backing pad is a medium tool used for connecting the polisher and buffing pad. With the premium hook and loop back, it can grip the polishing pad firmly so that you can finish the car paint polishing.
- FIRM ADHESION --- The Bottom Face Of This Backing Plate Is Planted With Hook And Loop Surface Whose Hooks Are Premium, Thick And Even-Distributed, Which Can Fix And Fasten The Polishing Pad Firmer And More Steady So That It Can Never Fall Off During Your Operation!
- SOFT AND FLEXIBLE RELIABLE POLISHING OPERATION --- The Soft And Flexible Edge Of The Backing Plate Can Navigate The Curves, Bends And Contours On Any Car Surface More Stably And Consistently! As The PU Backing Plate With High Capability Of Elasticity, It Can Coincided With The Car Paint.
- PREMIUM MATERIAL AND ADVANCED TECHNIQUE --- Well-Shaped By Selective PU And Adopted By Casting Technology, Firmly The Screw Thread Base Is Combined With The Backing Plate, Avoiding The Bad Situations Like Falling Off And Screw Slipping, So Offering Its Durable Lifespan Service!
- SCIENTIFIC BOTTOM DESIGN --- Our Designers Programme The Bottom Hooks Evenly And Focus On Their Balancing Distribution Strictly, Which Enables The Backing Plate To Grip The Polishing Pads Horizontally So That It Can Distribute the Pressure Evenly and Deliver The Stability And Efficiency For You In The Polishing Work!
- MULTIPURPOSE APPLICATION --- Universal Versions And Fits For Rotary Polishers Of 5/8" Thread Shaft, Widely Used For Surface Polishing And Buffing For Cars, Motorcycles, Trucks, Suvs, Or Furniture And Personal Decoration, Etc.
polishing backing plate,backing plate,da backing plate,5 backing plate,da backing plate,backing plate polisher
SGCB COMPANY LIMITED , https://www.sgcbautocare.com