Although people stay in the aisle for a long time, it is also a must-have road every day, and it needs to be illuminated at night. Many people prefer the ceiling lamp in the choice of lamps, because it is simple and stylish, and it is suitable for use in the aisle. So everyone knows how to choose? Is it convenient to install? Let's take a look at how big the aisle ceiling lamp is, and how to install the aisle ceiling lamp .
First, how big is the aisle ceiling lamp?
1, wattage size
The lamps used in the aisle do not need to choose too large wattages. After all, you don't need to read and read newspapers here. Therefore, you can choose a smaller wattage, and you can save money and environmental protection. Generally, 10-20 watts is enough. If the number of walkways is too long, three can be used, and the uniform distribution is reasonable.
2, how to distribute
The distribution of aisle lamps is mainly related to size, area and power. Conventional 15cm ceiling lamps have a longitudinal spacing of 1.5m and a lateral spacing of 2.5m. The 25cm ceiling lamps have a lateral spacing of 2.5m and a longitudinal spacing of 3m.
Second, the aisle ceiling lamp installation method
1, preparation tools
The tools to be used to install the ceiling lamps are mainly impact drills, electrician pliers, screwdrivers, insulating tape, a small piece of wood, and a wooden ladder.
2, first install the base
The base is the first component to be installed. You need to insert the reserved wire from the wire hole of the base. You need to hold the base of the ceiling lamp by hand and place it in the position to be installed. Then use a screwdriver to screw one of the screws into the empty position. Be careful not to screw too hard, check the position and then tighten.
3, connecting wires
After the base is fixed, the wires are connected. The process should pay attention to the fact that the two wires connected to the power line of the ceiling lamp should have good electrical contact, and should be wrapped with black tape and kept at a certain distance.
4, the installation mask
After the base and the wires are installed, the mask is installed. Just tighten the screws in the aligned position. After all the installations are to be energized, it is the normal use of the lamps.
Third, led ceiling lamp is broken how to repair
The led ceiling lamp is broken, generally the damage of the internal lamp, and everyone can repair and replace it at home. The operation steps are relatively simple, and the following are specific:
1. Turn off the power: Before making any changes to the luminaire, it is necessary to turn off the power first for safety reasons;
2, remove the lampshade: some of the lampshade can be rotated down, there are three snaps stuck, as long as the buckle is pulled back, you can take off the lampshade and take it down, you will find that one end of the lamp is already It’s black, and it’s not lit, it’s time to change it.
3, remove the lamp: remove the lamp, if the lamp is not black, it may be that the rectifier is broken, you must first pull the plug above the rectifier from the lamp and then the circlip of the fixed lamp Open it.
4, replacement parts: to take the original lamp to take off, take out a good lamp, stuck with a circlip. Plug the plug of the rectifier and finally attach the lamp cover. Then turn on the power and you will find that the luminaire can be used normally.
The above is about the general aisle ceiling lamp , the relevant content of the installation method of the aisle ceiling lamp , I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and exquisite design through the professional designer's on-site measurement room.
>> Click here for professional designer free room design
Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.
Standard Motorized Screen-Octagonal
Standard Motorized Screen,3D Projector Screen,Hd Projector Screen,Home Cinema Projection Screen
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-alr.com