Computer-to-plate (CTP) is a process of digital plate imaging. The advantage is that digital workflow is used to directly digitize graphics and images and then generate plate images through the printer. This eliminates the need for traditional imagesetters to produce film and manual. The process of imposition and re-printing has greatly improved the work efficiency. This article will introduce you to the Nanjing laser imagesetter.
There are several cutouts in the imagesetter. If a sudden error occurs, the safety switch must first be checked. There have been cases where the release box cutout has become loose, and the circuit that has not been connected to the circuit has started to report an error, and it can be solved after 3 days before and after checking. There are many transformers and magnetic switches in the imagesetter. Sometimes, if you accidentally touch it, it will be damaged. If you damage it, you don't need to buy the original accessories. The domestic transformers and magnetic switches can be used instead.
The installation photo-setting machine needs to be designed according to the manufacturer's environmental requirements. The hardware must be assembled according to the standard to meet the indoor dry humidity requirement. In the rainy and humid season from April to August every year, in order to save, the photo-receiving machine does not pay attention when not in use. The indoor dry humidity standard is dehumidified and moisture-proof when the row is discharged. If moisture enters the imagesetter, the most likely problem is the laser motor of the photo-aligning machine. After the damp, an oxide layer will be formed between the rotor and the stator. Although the camera motor can still work when it is started up, after turning the laser motor by hand, it can easily feel the difficulty of rotation and accompanied by obvious friction sound. Such a laser motor may sometimes work and sometimes not work.
After years of production and operation, the laser phototypesetting machine has recovered various investments and the company can operate at low profit. Therefore, the equipment of the laser imagesetter is relatively cheap, and the cost of film and plate is relatively low, and the cost is high. Small and medium-sized printing enterprises are more suitable for the investment of small and medium-sized investors in order to reduce the cost and apply them widely.
Article source address: http://
Stainless Steel Utensil Holder
Stainless Steel Utensil Holder,Kitchen Utensil Holder,Stainless Steel Cutlery Holder,Restaurant Utensil Holder
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jetkitchenwarejm.com