Yinglipu garbage processor usage method Yinglipu garbage

Since the emergence of the British garbage disposer, the sanitation of the kitchen has become particularly clean, and the flies are no longer visible, and the smell of kitchen waste is not heard. This is the most intuitive experience for consumers who have used the Philips processor. So for the Yinglipu garbage processor, what is its method in use?

How to use the Yinglipu garbage processor

On weekdays, how do we use the Philips waste processor? Turn on the tap. Press the power switch to start the processor. Put food waste into the kitchen waste processor. After putting food waste into the processor, let the processor and tap water continue to work for a few seconds. Turn off the processor switch and faucet.

When using the Philips waste disposer, are there any points to be aware of? If they fail, it can be a big headache because you need to remove all the food before you can repair it. Fortunately, the garbage processor can be used for many years without major overhaul with a little maintenance. Maintenance is very simple, that is, to ensure that no harmful substances are thrown into the waste disposer - grease, chunks of food, hard foods, and fiber-rich foods. In addition, when the processor is running, it should also ensure that the water is constantly flowing to flush the accumulated kitchen waste out of the drain hole instead of solidifying inside the appliance.

What are the methods of using the Yinglipu waste disposer? Install the kitchen waste processor power supply and the air switch (single models need to be equipped separately). Then cover the sink plug, fill it with water, then remove the plug to let the water drain. If there is leakage, repair it in time so that the food waste disposer can be used.

Yinglipu waste processor cleaning method

One of the cleaning methods of Yinglipu waste disposer: to remove the taste from the odor orange peel. The most natural way to refresh the Yingpuri waste processor and kitchen taste is to grind some orange peel. Any citrus fruit is fine, such as oranges, lemons, grapefruits, and limes. The citric acid in these peels cleans the blade and eliminates odors.

Yinglipu Waste Disposal Method 2: Use baking soda and vinegar. Mixing baking soda and vinegar is a good way to eliminate odors. Pour in a half cup of soda, then slowly pour in a glass of white vinegar. The mixture will sizzle and create bubbles, so after 5 to 10 minutes, rinse the Yinglup Waste Disposer with hot water or boiling water.

The third method of cleaning the Yinglipu waste disposer: use bleach. Bleach is very effective at killing bacteria and giving the drainage system a new look. But you can't use too much bleach because it will harden the grease in your processor and make it harder to remove it. A spoonful of bleach is diluted with 3.8 liters of water and then slowly poured into your Yingppu waste processor.

If you are also a member of the Yingpuri Waste Disposer, then Xiaobian’s introduction to the use of the Yingli Waste Disposer and the cleaning steps will definitely help you. Compared with other brands of Yinglipu garbage processors on the market, Yinglipu waste disposers have always had its advantages. You can refer to it.