In order to have a good environment in our kitchen, many people will choose to install a range hood in our kitchen. This will protect our kitchen environment. Let our environment be better. However, there are certain minor problems when using it. Below, everyone and the decoration of the small series to understand, what are the skills of the range hood repair ? Let everyone learn a little way to repair.
First, what are the tips for repairing range hoods?
1. When using it, it is very important to maintain the daily hood of the range hood. The surface layer will be stained with oil and dust, which will affect the later application and aesthetics. At this time, it is necessary to wipe the dirty area with a dry cloth or a soft cloth with a neutral detergent. At the same time, it is necessary to regularly clean the inside of the machine and extend it. Service life.
2. Let us understand the reasons that affect the performance of the range hood. It is also very important. In fact, the smoke evacuation effect of the equipment is good. It is very important to place the area. Generally, it is not to meet the head or to bake. Of course, as long as it is carefully mastered, the soot source can approach the effective space.
3, the use has to remember, and finally on the side not close to the wall, it is also very important. It is best to add a 300mm extension baffle and use a light-transmissive material as much as possible so that a condensation envelope is formed under the smoking hood. Because if the motor is not installed, it will not only affect the smoking effect, but also increase the noise.
Second, how to choose a range hood
1. Let us first understand our parts. Suction is also an important measure to reflect the quality of the range hood. It has good use. Generally, the motor power of the range hood depends on the amount of suction. Generally, the higher the motor power, the greater the suction. In addition to strong suction, we must also pay attention to whether the suction is even, pay attention to whether it will wind down or leak.
2, a good product has a tobacco control area, soot will experience before rising. At this time we have to master it. The three stages of bombing, ascending, and spreading, so the tobacco control area determines the range in which the soot is sucked away. If the tobacco control area is relatively large, the soot will not be easy to run, so this should be taken care of when purchasing.
3, the noise when choosing the product, not the range hood must have, good product noise is very small. If the hood is too noisy, it means that the quality of the internal parts is not good, because the noise of the hood is usually related to the internal parts, so the noise index of the range hood is preferably not more than 74dB. This can save a lot of trouble in the subsequent maintenance.
In our lives, everyone has a good use of product protection. So everyone has to understand in terms of maintenance. This is a little bit of a problem that everyone can handle on their own. If you still want to continue with more renovation information. Stay tuned for our home renovation website. Our website will keep updating the information.
More related wonderful reading:
Range hood repair method range hood repair points
Calculator Writing Tablet,Calculator
Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com