PT-125 plate machine product technical features, washing form: immersed development plate design, development, washing, gluing, drying one-time automatic completion; man-machine interface: large LCD display, six-button operation, machine function and The operating status is clear at a glance, this article will introduce you to the Guangdong ctp plate machine supplier.
When the plate processor is enabled, first check whether the circulation pump works normally, whether the interfaces and pipes are leaking, and ensure that the gears of each component are operating normally. After use, turn off the power and water, and use a cleaning bottle to rinse off the liquid crystal attached to the roller shaft and gear. Rinse the rubber roller with clean water to remove the glue remaining on the rubber roller, and replenish the liquid in the refill tank.
The thermal plate-making machine uses a fine microcomputer control system to control the data, functions such as squeezing time, liquid medicine and drying temperature, circulation filtration, cleaning rubber roller, and secondary glue washing. A variety of modes, such as random correction, are available for selection.
The thermal plate-making machine is equipped with an emergency stop switch on the imported plate feeding table; it is convenient for handling problems under special circumstances and avoiding unnecessary troubles. Drying automatic protection device for overheating; automatic refilling device for low liquid level; closed protection device for mechanical transmission system; and safety design of safety warning signs for important safety parts of the machine.
The manufacturing company has developed and produced a special cleaning agent for the plate-making machine, which is used for cleaning the surface crystallization of the rubber roller in the plate-making machine and crystallization of the inner wall of the tank, and the effect is good. The product here is generally a composite strong acid software salt granule, or a liquid concentrate cleaning agent, which is specially used for the dirt treatment of the PS plate developing machine, and is non-corrosive to the mechanical and rubber rollers and the brush.
Article source address: http://
Premium plastic Folding Stools are suitable for Indoor Outdoor Use, school functions, banquets, sporting events, parties, graduations, sit around a campfire, etc. It's lightweight, with footstool height, making it easy to carry and set up. These folding stools are made of UV-protected high-density polyethylene plastic and have the capacity to hold up to 200 lbs in weight. The folding portable stool is weather resistant. These plastic folding stools set of 2 are commercial grade for indoor and outdoor use. Chairs with a textured surface for a neutral style that will coordinate well with any venue. Non-marking floor caps make it convenient to use on bare floors cause they won't leave marks or scratches.
Plastic Folding Stools,Plastic Fold Up Stool,Plastic Folding Footstool,Plastic Collapsible Stool
jiangsu concentric internatinal ltd , https://www.concentric-corp.com