Tiles are essential when decorating homes. Most people choose tiles in the kitchen and bathroom. Not only is the tile resistant to moisture and dirt, but it is also beautiful and durable. Many people know that tiles need to be soaked in water before they are laid so that the tiles laid are more solid. So, how long does it take for a tile to soak? Will the tiles fade after soaking in water? Today Xiaobian came to answer these questions for everyone.
Question one: Why do ceramic tiles soak?
There are many types of tiles, including polished tiles, glazed tiles, and all-in-one tiles, but in either case, there is a certain amount of porosity. Tile water can fill these pores. The first is to prevent the tiles from being too dry and cracking and to reduce the service life. The second and most important reason is to prevent the tiles from absorbing the moisture in the cement mortar, causing the tiles to become empty and fall off. Cracks appear. When the tile “drinks†full of water, the water absorption rate becomes lower, and the cement mortar can dry naturally, which reduces the emptiness and shedding of the tiles.
Question 2: Which tiles need to be soaked?
Tile water is mainly to make the tiles "drink" water, so that it will not absorb the moisture of cement mortar, not all tiles need to soak. If the water absorption rate of the tiles is very low, then there is no need for water soaking. For example, porcelain tiles with a water absorption of less than 0.5%, polished tiles and vitrified tiles belong to porcelain tiles, as well as antique tiles of some manufacturers. Embryos also belong to porcelain tiles, which do not require soaking. In addition, we generally do not need to soak the water in the ground tiles, but the glazed wall tiles used in kitchen and toilets generally have a water absorption rate of more than 10%, so we must soak water before laying.
Question 3: How to give water to the tiles?
The so-called "bubble water" of tiles means that all the tiles are immersed in water. Generally, the construction party will prepare a large basin. However, there are also some irresponsible construction teams that use ceramic tiles to pour water pipes onto them so that the tiles can only be wetted and the tiles cannot be fully “filledâ€. After laying, it is likely to cause various problems.
Question 4: How long does it take for a tile to soak in water?
Because of the different water absorption rates of different tiles, there is no specific standard. Generally, the wall tiles are immersed for a maximum of twenty to thirty minutes, but the end result is that the tiles “drink†the water and no longer bubble up. With high water absorption, it will take longer to soak. In the rainy season, due to the moist air, the time must be shortened accordingly; when the weather is dry, the time must increase accordingly.
Question 5: Will the tiles change color after soaking in water?
After the tiles are soaked, the color will become darker, and the light-colored tiles will become more obvious. This is a normal phenomenon, so everyone should not panic. In addition, because the tiles will be darkened in color, so when you soak the tiles, use a little foam, because after soaking the tiles can not be returned, dried several times, the first soaked tiles and the second soaked The color of the tiles will also be different.
<\p><\div>
Pressure sprayer can be divided into Hand Pressure Sprayer, Hand Pump Sprayer , garden spryer, Sprayer Garden,disinfectant ect . It has better quality and better drainage . We have many advantages over other products , first of all , we are very stricted in controling over the raw materials , sencondly , we have more than 20 years experience in mold translation . thirdly , we will carry out a complete inspection of each product , we have a complete set of testing equipment to ensure that each product to the hands of customers have no quality problems . We have many advantages over other products . Pressure sprayer's working Pressure is from 2 to 8pa . The material is PE and different color can be offer . It has a capacity of 1L/1.5L/2L/3L . Front switch is more easy to control , stepless can be adjusted . It has high corrosion resistant and durable . It's very convenience to be used . The effect of fog water is very good , it can also be spray straight line . it can be used for gardens , parks , botanical gardens , etc . There's an exhaust valve in it , When the pressure is out of range , it can protect your safety . Pressure sprayer has already been the daily tool for people to make plants better . Pressure sprayer can also used on routine disinfection . It will help your daily life more convenience , more safe .
Pressure Sprayer,High Pressure Sprayer,Backpack Pressure Washer,Pressure Sprayer Builders Warehouse
YUYAO ZHENGYU SPRAYER FACTORY , https://www.zysprayer.com