[ Chinese wardrobe net ] Nowadays, custom furniture is getting more and more people's attention and favor, because custom furniture can be played according to its own space and preferences, and it is 100% in line with its own aesthetics. Nowadays, many family wardrobes will also be customized. Let's introduce the size of the locker. Customized wardrobes refer to lockers that can be tailored to individual requirements. The configuration of the function keys in the interior of the locker is also ever-changing. The size of each part of each part is different. The specific implementation needs to communicate with the designer. A wardrobe that meets your needs.
Locker size introduction
1, the depth of the locker
The depth of the big locker is generally 55-60 cm; if the space is not particularly tight, it is recommended to choose a depth of 60 cm, and the charge for the 55 and 60 cm manufacturers is the same, but the feeling of hanging clothes is different. .
2, the width of the cabinet door
The width of the swinging door is the best between 45 and 60 cm, and the width of the sliding door is between 60 and 80 cm. The pressure of the hinge is not as good as the track, so it is not suitable for the door of the swing. Too wide and too heavy.
3, the height of the hanging coat
The height of the hanging coat is enough for 140 cm; the longest hanging gown is less than 140 cm in height, the long down jacket is 130 cm, and the suit is 120 cm long after being stored in the bag.
4, the height of the hanging jacket
The height of the hanging top is between 85 and 95 cm; the height is 90 cm, and the space is fully utilized. If you want to be a little looser, add up to 95 cm.
5, the height of the hanging pants
The height of the hanging pants is between 80 and 90 cm;
6, the height of the shoe box
The height of the shoe box is controlled at 25-30 cm;
7, the height of the quilt
The height of the quilt is relatively flexible, about 30 cm; this space is mainly used to store the quilt that is not used in the season, usually at the top of the wardrobe.
8, the height of the backpack
The height of the storage backpack is more flexible, and should be considered from the perspective of the overall design of the wardrobe, as far as possible in the size requirements of other spaces, to achieve "flat".
9, the distance from the clothes rail to the upper panel
When installing the clothes rail, it should be noted that the clothes rail must be taken according to the actual depth of the wardrobe interior, and the distance from the upper board must be 4-6 cm. This size must be met because the distance is too short. It will be more difficult to put the hangers in the future; the distance is too long and the space is wasted.
10, the installation height of the clothes rail
The clothes rail also belongs to the hardware series. At least two or three screws should be fixed on both sides of the good clothes rail. When positioning the hole, be sure to pay attention. The height of the clothes rail should be the height of the hostess plus 20 cm.
Name Model Size Nine Door Locker KM88054 H1820*W900*D400mm Six Door Locker HG-291 H1850*W900*D500mm Five Section Locker KM-88101 H1850*W900*D400mm Three Door Locker HG-287 H1800* W900*D500mm six-door locker 88052 H1850*W900*D420mm
Dressing room locker design
Dressing room lockers can't be separated from their size. So let's take a look at the locker locker size design now. In general, many manufacturers are now able to design locker locker sizes based on customer needs. Because people store more or less items, the size of locker lockers is more diverse. Now we usually have two cabinets, multiple cabinets, and lattice cabinets. The grid cabinets are mainly used for storage. Clothes and other small things. Of course, the size of the locker locker will vary depending on the model.
Production of locker lockers
After learning about the design of the locker locker size, let's take a look at the locker locker. It is said that the locker locker made by the present is the locker locker made by the cold-rolled steel sheet of the original material after a series of production processes. However, because the location used is different, the required grades will be different, so the locker cabinet size design and production requirements will be different. Nowadays, the production process of general locker lockers is mainly divided into two types: the sheet metal process and the stamping process.
It is the production standard of the size of the locker above. In fact, there is no specific standard for the size of the locker. As long as it is in line with its own reality, the size can be free. The best size for you is the locker. The introduction of the size, you can choose a wardrobe size to make a good reference!
Stainless Steel Mug With Bamboo Shell
WUYI YINGYUAN IMP&EXP CO; LTD. , https://www.yingyuandrinkware.com