If this is the case, the water discharged from the vast majority of taps now comes with bubbles. Why is this? In fact, the reason for the large amount of bubbles in the water is that the bubbler is installed inside the faucet. The advantages of installing a bubbler faucet are a lot of convenience for home life. The following is a small series to let everyone know about the advantages of the bubbler and the working principle of the bubbler.
Bubbler advantages:
Water saving, mainly through multi-layer filters
[1] Buffered water flow, concentrated water column, mixed air increasing contact water area and constant water flow
[2] and so on. In the scene, the water column without a bubbler is scattered, it is difficult to come into contact with the hand or the contact surface is small, and the water is too large to cause waste; the bubbler with a touch switch (solid) can quickly block the water flow and further save water (45 %)
[3]; Bubblers with adjustable water flow can enforce the amount of water required for water conservation (35~85%)
Prevent splashing, uniform water column after buffering, vertical drop of water column;
Hygienic, multi-layer filter can filter most of the sediment, impurities, bubbler with touch switch to reduce contact with faucet;
Constant water flow/water output, with pressure compensation or flow limiting device (common in showers) can guarantee a certain amount of water when the water pressure is too low, limit the amount of water when the water pressure is too high, and stabilize when the water pressure is unstable Water volume
Faucet bubbler works:
1. The bubbler is a device that is installed at the outlet end of the spout and mixes (increases) air at the outlet. The hand-feeling is more comfortable, but it is inferred that “it can fully mix the flowing water and air, reduce the water pressure, and at the same time improve the washing power of water, thus effectively reducing water use. the amount". It is actually irresponsible, and it is extremely irresponsible (I hope the experts who put forward this idea are not clearly stated or simply misunderstood by us).
From the perspective of the fluid continuity principle, the bubbler essentially reduces tap water injection velocity, impact force, and impulse reduction (experts also recognize that water pressure is reduced).
The essence of decontamination washing is force, water is only the material carrier of transmission force, and the only way to improve the water use efficiency is to strengthen and improve the impulse of water and particle impact force, and the bubbler can only slow down the flow rate of water and reduce it. Tap water large impulse and particle impact. Therefore, after installation of a bubbler, it is impossible to save water (whether it is necessary to use more water, you can experiment and compare yourself and come to your own conclusion).
2. The faucet bubbler is to change the “pipe flow†of the water to the “line flow†at the water outlet of the faucet, and then to change the “line flow†to “jet†through the pressure of the air, and then “divide waterâ€. Water evenly, so that the water is soft. The pressurization of the air gives power to the water and reduces the flow of water without affecting the use. It can reduce the water fee, reduce energy consumption, and reduce the amount of pollutants discharged.
The water-saving nozzle can effectively prevent the accumulation of dirt, eliminate the possibility of bacteria breeding, and effectively protect human health while protecting water and energy.
<\p><\div>
Pvc Adult Raincoat,Pvc Adult Rainwear,Plastic Adult Rainwear,Disposable Plastic Raincoat
Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com