After hearing the customer's complaint, the air shower room or other purification equipment bought in the previous two days did not find any problems when it was sent to the customer's flashlight, but it was found that there were some parts when the package was opened. The problem of being bumped or falling paint affects the overall beauty of the air shower room. Therefore, the air shower room of our company must require wooden boxes when it leaves the factory;
The volume of the air shower is generally above 2M3. If it is a package transportation, if it is the whole piece, it is very necessary to play the wooden box. For the transportation problem of the air shower, KLCFILTER summarizes the matters that should be paid attention to. as follows:
First of all: the stainless steel air shower room is also good, the whole cold plate air shower room is also good, should pay attention to the protection of the air shower room box, to prevent the box from being scratched or rained, so first use foam protection.
It should be prevented from being punctured, preferably wrapped in a separate strip.
Again, the packaging problem of the air shower fan and circuit board and other accessories
Air conditioning room packaging problem considerations:
1. When the air shower room is ready for loading, first clean the indoor and outdoor cabinets, and prevent other pollutants from being attached to the air shower room.
2. Next, use the paper skin to enclose the air shower box. Especially between the corners and corners of the air shower box, it is suitable for long-distance freight transport to reduce collision.
3. After that, the thin plastic mold will be surrounded by the air-dried outdoor wrapping paper, which can effectively reduce the rainy days of the cargo and avoid the penetration of water.
4. Finally, the air shower room is bound in a wooden box, and the crane is used to carry the transport tool.
5. The air shower room is suitable for general transportation. It should not be placed sideways, impacted or collided during transportation. It is best to keep it flat.
6. After the air shower room arrives at the destination, check the box at the first time to see if there are any damage caused by transportation. If the damage is found, you should tell the logistics company or the delivery driver and indicate the relevant on the delivery note. Happening.
7. The packaged air shower should be stored in a well-ventilated warehouse with a relative humidity of no more than 85%. There should be no acid, alkaline or other corrosive gases in the surrounding air.
Although the packaging and transportation of the air shower is a complicated process, if you choose a regular air shower company to ensure the safety of the air shower, other details can also refer to the previous: wind What should I pay attention to when packaging and transporting and storing?
Here to introduce our product range of face palettes, sets or kits, to have it all in one place for instant top ups. Face palettes allow you to conceal, contour and highlight for the perfect visage at any given time. Find amongst color correcting palettes, contour duos and glow-enhancing quads to ensure that you have everything you need in one, easy-to-use place. Oh, don`t forget to include brush or setting spray? And much more!
Face Makeup Kit, Conceal or Contour Set, Easy-to-use Makeup Set,Face Base Makeup Kit
Zhongshan Meido Cosmetics Industry Co., Ltd , https://www.meidocosmetics.com