Plates are an important decoration material indispensable in modern life. It is divided into thin plates, medium plates, thick plates, extra-thick plates, and flat rectangular building material boards that are usually made of standard size. Then, what kind of plates are they divided into? What are the specifications of the plates?
Â
Â
Type of sheet: MDF
MDF, also known as fiberboard, is a man-made board made of wood fiber or ** plant fiber, plus urea-formaldehyde resin or ** suitable adhesive. It is divided into high density board, medium density board and low density board.
Sheet specifications: The general specification is 1220mm*2440mm*2mm~30mm, and special specifications need to be customized.
Â
Â
Type 2 of the plate: large core board
The industry is called blockboard, which is made up of two sheets of veneers. The price of the large core board is cheaper than that of the thin core board, and the bending strength is poor, but the transverse bending strength is high.
Plate specifications: 2440mm * 1220mm, according to the thickness is generally 3, 5, 9 cm.
Â
Â
Type of plate three: particle board
Particleboard is a thin sheet made of wood scrap as the main raw material, added with glue and pressed by additives. It is divided into two types: extruded particle board and flat pressed particle board.
Sheet specifications: 1220mm*2440mm special thickness is 25-45mm
Â
　　
Type of plate four: melamine board
It is a melamine impregnated film paper veneer wood-based panel. It is used to put paper with different colors or textures into the melamine resin adhesive to be soaked, then dried to a certain degree of curing, and laid on the surface of particleboard, medium density fiberboard or hardboard, and heated. Decorative plates.
Sheet specification: 2440mm*1220mm
Â
　
Type of plate five: gypsum board
The gypsum board is made of gypsum as the main raw material and is made into additives and fibers. It is insulated and the sound absorption is also very light and incombustible. When the gypsum board is combined with the light steel keel, it forms the material of the gypsum board ceiling. It also has the gypsum board and the hollow gypsum board. The gypsum board is used for partitioning, and the ceiling is less.
Sheet specifications: 2400*1200*9.5~12, 3000*1200*9.5~12, 2440*1220*9.5~12, 1800*1200*9.5 (unit: mm)
Â
　
Type of plate six: plywood
It is commonly known as a thin core board, which is made of three or more layers of 1mm thick veneer or sheet adhesive. It is currently the most commonly used material in hand made furniture.
Sheet specifications: 6mm, 5mm, 9mm, 12mm, 15mm, 18mm
Â
　
Type of plate seven: decorative panel
The decorative panel is a decorative sheet with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material.
Sheet size: thickness is 3mm Â
Â
Type of plate eight: fire board
A decorative sheet made of a silicon material or a calcium material as a main raw material, mixed with a certain proportion of fibrous materials, light orthopedics, adhesives and chemical additives, and subjected to autoclaving.
Sheet specifications: thickness is generally 0.8mm, 1mm and 1.2mm
Â
Â
The above is the type and specifications of the plates introduced by Wan Zhoulin, the top ten environmental protection sheet brand.
Â
Â
—— END——
Wan Zhoulin plate
The core is more than the heart, the real thing, the table is like one!
Wan Zhoulin Plate National Service Hotline: 400-8635858
Official WeChat: wzlbc08
Â
Memory Foam Mattress,10 Inch Memory Foam Mattress,Compressed Memory Foam Mattress,Travel Memory Foam Mattress
HESHAN HAIMA FURNITURE CO., LTD , https://www.springmattress.com